Sleep A10 | Noise Blocking Earbuds for Sleeping
All-New Sleep Earbuds for Better Sleep
-
Comfortable, even for side sleepers
-
4-point noise masking system to cover noise for sleep
-
Unlimited audio via Bluetooth and the soundcore app
-
Dynamic drivers for sleep-inducing sound
-
Manage your sleep health with sleep monitoring and personal alarm clock
-
Note: For optimal performance, use the latest version of the soundcore app
Sold Out
-
Comfortable, even for side sleepers
-
4-point noise masking system to cover noise for sleep
-
Unlimited audio via Bluetooth and the soundcore app
-
Dynamic drivers for sleep-inducing sound
-
Manage your sleep health with sleep monitoring and personal alarm clock
-
Note: For optimal performance, use the latest version of the soundcore app
Order Support
Delivery & Payment
Sleep A10 | Noise Blocking Earbuds for Sleeping
Sold Out
Tiny Size, Lightweight Build
Forget You're Wearing Earbuds, Even When Sleeping On Your Side
Sleep A10's slim profile and lightweight build fit comfortably in your ears throughout the night, even if you sleep on your side or move around a lot. Note: Choose the most suitable-sized ear tips for your ear canals. If you're using the wrong-sized ear tips or Sleep A10 is not worn correctly in your ears, the Bluetooth connection may be unstable.
Comfort-Focused Accessories
Soft and Durable
Choose from 3 sizes of ear wings and 4 pairs of Twin Seal ear tips to find the ideal combination for your ears. Made from soft, flexible silicone, they cushion your ears for all-night comfort.
Tiny Size, Lightweight Build
Forget You're Wearing Earbuds, Even When Sleeping On Your Side
Sleep A10's slim profile and lightweight build fit comfortably in your ears throughout the night, even if you sleep on your side or move around a lot. Note: Choose the most suitable-sized ear tips for your ear canals. If you're using the wrong-sized ear tips or Sleep A10 is not worn correctly in your ears, the Bluetooth connection may be unstable.
Enjoy Virtually Unlimited Audio
Connect to Sleep A10 via Bluetooth to listen to virtually unlimited content. Note: Not suitable for outdoor use. If unable to connect, ensure earbuds are set to Music mode.
Enjoy Virtually Unlimited Audio
Connect to Sleep A10 via Bluetooth to listen to virtually unlimited content. Note: Not suitable for outdoor use. If unable to connect, ensure earbuds are set to Music mode.
How to Wear for Better Sleep
1. Select ear tips and ear wings in a suitable size for your ears.
2. Put earbuds in your ears at this angle.
3. Twist to lock into place.
4. Avoid blocking the area where the soundcore logo is displayed (shaded blue) with the areas of your ears highlighted in blue.
FAQ
How-To Videos
How to wear Sleep A10
How to use Sleep A10 features on the soundcore app
How to pair and reset Sleep A10
How to connect Sleep A10 to the app and update firmware?
How to solve a connection issue on Sleep A10
How to use your soundcore Sleep A10
Wearing
What should I do if my Sleep A10 earbuds are uncomfortable and have an unstable fit?
We suggest trying the following:
- Make sure you wear the ear tips and ear wings correctly.
- Choose the ear tips and ear wings that fit your ears the best, we recommend that you start with size M ear tips and ear wings.
- Insert the earbud into your ear and find a suitable position for the best fit. If the earbuds are too deep in your ears, it may affect the Bluetooth connection. If you experience connection issues, we recommend that you replace the ear tips and wings with larger ones.
- When using them in bed, try a different soft pillow.
- Use soft pillows. Pillows that are too hard may exert more pressure on your ears if you sleep on your side, which can affect the connection to your phone.
- Do not use water pillows or pillows with metal or magnetic components.
- Make sure you wear the ear tips and ear wings correctly.
- Choose the ear tips and ear wings that fit your ears the best, we recommend that you start with size M ear tips and ear wings.
- Insert the earbud into your ear and find a suitable position for the best fit. If the earbuds are too deep in your ears, it may affect the Bluetooth connection. If you experience connection issues, we recommend that you replace the ear tips and wings with larger ones.
- When using them in bed, try a different soft pillow.
- Use soft pillows. Pillows that are too hard may exert more pressure on your ears if you sleep on your side, which can affect the connection to your phone.
- Do not use water pillows or pillows with metal or magnetic components.
I hear a noise when my pillow rubs against my earbuds. What should I do?
The rubbing sound is due to the material of your pillowcase. Try using cotton or silk pillowcases.
Operation
How do I turn my earbuds on and off?
After opening the charging case, the earbuds will automatically turn on. They turn off when you place them in the charging case and close it. You cannot turn the earbuds on and off manually.
What should I do if the double tap doesn't respond?
The Sleep A10 earbuds do not have touch control, so you may have to use a bit of force when pressing the button.
What should I do if the double tap gets triggered without me pressing it?
When the earbuds' G-sensor vibrates, it may recognize it as a double tap, resulting in a false trigger. To avoid this issue try to avoid dropping the earbuds, throwing the earbuds, strenuous exercise, etc.
How do I reset Sleep A10 earbuds?
Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators inside the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
How do I switch between music mode and sleep mode?
1. Firmly tap the left earbud twice.
2. Switch in soundcore app.
2. Switch in soundcore app.
Listening Scenarios:
1. How do I ensure Bluetooth music plays the whole time I'm listening?
2. How do I ensure white noise plays the whole time I'm listening?
3. How do I ensure Bluetooth music stops and white noise plays after I fall asleep?
4. How do I ensure that Sleep A10 automatically masks noise according to the external noise level after I fall asleep?
1. Ensure Smart Switch is turned off.
2. Ensure you turn off Smart Volume Control after you have entered sleep mode.
3. Ensure Smart Switch is turned on and Smart Volume Control is turned off.
4. Ensure Smart Switch and Smart Volume Control are both turned on.
2. Ensure you turn off Smart Volume Control after you have entered sleep mode.
3. Ensure Smart Switch is turned on and Smart Volume Control is turned off.
4. Ensure Smart Switch and Smart Volume Control are both turned on.
How do I adjust the volume in sleep mode?
When using the earbuds in sleep mode, you can only adjust the volume in the soundcore app.
How does the smart switch work?
When the earbuds detect that the user is asleep, it will automatically pause sound played via Bluetooth, switch from music mode to sleep mode, and automatically play white noise.
If you want to listen to Bluetooth again, firmly tap the left earbud twice or change mode via the soundcore app to switch back to music mode. Double-tap the right earbud to play Bluetooth music again.
If you want to listen to Bluetooth again, firmly tap the left earbud twice or change mode via the soundcore app to switch back to music mode. Double-tap the right earbud to play Bluetooth music again.
How does the Smart Volume Control feature work and how can I activate it?
When the Smart Volume Control feature is enabled, the earbuds automatically start playing sleep music. When the external noise changes, Sleep A10 automatically adjusts the volume of white noise according to the external noise level. You can activate this feature in the soundcore app.
Note: This feature only works in sleep mode and activates when the user has fallen asleep.
Note: This feature only works in sleep mode and activates when the user has fallen asleep.
Do Sleep A10 earbuds support ANC?
No, these earbuds don't support ANC, but they use a 4-point passive noise masking system to block out external noises.
How do I set a time limit for playing sleep music?
Switch to Sleep mode in the app, then select "Playback Duration" and adjust the time limit.
Note: The default playback duration is set for two hours. You can adjust this setting to your own preference.
Note: The default playback duration is set for two hours. You can adjust this setting to your own preference.
How do I disable the controls on the earbuds themselves?
In the soundcore app, go to "Control" to change the tap control settings.
What should I do if the following issues happen?
1. When using them in music mode, the earbuds unexpectedly switch to sleep mode and play white noise.
2. When using them in sleep mode, the earbuds prompt you to switch to music mode and pause the white noise.
In some specific scenarios, the left button on the Sleep A10 earbuds may be accidentally double-tapped, which switches the mode. In this situation, firmly tapping the left earbud twice will switch back to the desired mode.
Charging
What should I do if any of the following problems occur?
1. The earbuds don’t recharge in the charging case.
2. The earbuds stay connected to the device even after being placed in the charging case with the lid closed.
3. The earbuds don't turn on when taken out of the charging case.
1. Confirm the charging case has power left (open the charging case to check if there is white light flashing).
2. Clean the charging pins with a dry cloth and rubbing alcohol. This is to ensure all charging contact pins on the earbuds and charging case are completely clean and dry from sweat and water. Then put the earbuds correctly into the case. The first light flashes twice when the left earbud is placed in the case. The third light flashes twice when the right earbud is placed in the case.
3. Use the certified charging cable and wall charger.
4. Check whether the ear tips and ear wings are installed properly.
5. Make sure the earbuds are put in the charging case correctly.
2. Clean the charging pins with a dry cloth and rubbing alcohol. This is to ensure all charging contact pins on the earbuds and charging case are completely clean and dry from sweat and water. Then put the earbuds correctly into the case. The first light flashes twice when the left earbud is placed in the case. The third light flashes twice when the right earbud is placed in the case.
3. Use the certified charging cable and wall charger.
4. Check whether the ear tips and ear wings are installed properly.
5. Make sure the earbuds are put in the charging case correctly.
What should I do if my Sleep A10 earbuds have a short battery life?
- Playtime in music mode is up to 6 hours at 50% volume.
- Playtime in sleep mode is up to 10 hours at 50% volume.
We also recommend you try the following tips:
- Fully charge your earbuds.
- Turn on the smart switch, the earbuds will enter sleep mode after detecting the user has fallen asleep, which can prolong battery life.
Note:
Battery playtime in Music and Sleep mode is obtained from testing in the Anker laboratory using the earbuds' default settings; no smart volume control (sleep mode only), and 50% volume.
The actual playtime may vary by volume, audio source, environmental interference, usage, etc.
- Playtime in sleep mode is up to 10 hours at 50% volume.
We also recommend you try the following tips:
- Fully charge your earbuds.
- Turn on the smart switch, the earbuds will enter sleep mode after detecting the user has fallen asleep, which can prolong battery life.
Note:
Battery playtime in Music and Sleep mode is obtained from testing in the Anker laboratory using the earbuds' default settings; no smart volume control (sleep mode only), and 50% volume.
The actual playtime may vary by volume, audio source, environmental interference, usage, etc.
How long does a full charge take (including headphones and charging case)?
Approximately 2 hours.
How many times can the charging case charge the earbuds?
7 times on full charge.
Do the earbuds support wireless charging?
Wireless charging is not supported.
Bluetooth
What should I do if my Sleep A10 earbuds disconnect or the sound is choppy?
Please note that this doesn't necessarily mean there's an issue with the earbuds, so check your connected devices and surroundings. Bluetooth signals may be influenced by obstructions, such as walls, pillars, home appliances, Wi-Fi, and more. To ensure a stable connection for these earbuds, we recommend avoiding such obstructions and use in an indoor environment.
To fix this issue, try the following:
1. Fully charge and reset your earbuds as stated below and re-pair them.
Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Make sure you're wearing the earbuds correctly.
3. Try another set of the ear tips and ear wings in a different size.
Please note that if the earphones are too deep in your ears, it may affect the Bluetooth signal. Try larger sizes to reduce the in-ear depth of the earbuds, which may improve the connection stability.
4. Check the earbuds by listening to a downloaded song/video if you're using them in music mode.
5. Check the earbuds with another Bluetooth device in a different environment to see if there's a difference.
To fix this issue, try the following:
1. Fully charge and reset your earbuds as stated below and re-pair them.
Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Make sure you're wearing the earbuds correctly.
3. Try another set of the ear tips and ear wings in a different size.
Please note that if the earphones are too deep in your ears, it may affect the Bluetooth signal. Try larger sizes to reduce the in-ear depth of the earbuds, which may improve the connection stability.
4. Check the earbuds by listening to a downloaded song/video if you're using them in music mode.
5. Check the earbuds with another Bluetooth device in a different environment to see if there's a difference.
What is the maximum range of the Bluetooth connection?
10 meters/33ft
Which Bluetooth version do Sleep A10 earbuds use?
5.2
What is the Bluetooth latency?
180ms-200ms
What Bluetooth codecs do the earbuds support?
SBC, AAC
The sound is quieter in one ear when I sleep on my side. What should I do?
1. After sleeping on your side, one earphone may be blocked due to pillow obstruction, resulting in Bluetooth disconnection.
2. Sleeping on your side at a certain angle causes the ear tips to be offset and block the earbuds, resulting in no sound or low sound.
We recommend you try the following:
1. Adjust the positioning of your head and pillow.
2. Try larger ear tips.
3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.
2. Sleeping on your side at a certain angle causes the ear tips to be offset and block the earbuds, resulting in no sound or low sound.
We recommend you try the following:
1. Adjust the positioning of your head and pillow.
2. Try larger ear tips.
3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.
What should I do if any of the following problems occur?
- Earbuds cannot pair or reconnect with my device.
- One earbud does not pair with the other earbud or my device.
- No music plays after connecting with my device when using them in music mode.
- Only one earbud has sound.
1. Remove the protective film covering the connectors on the earbuds.
2. Reboot the Bluetooth device you're using (such as a phone or computer). Forget all the pairing records of your earbuds on your device and turn off Bluetooth.
3. Reset the earbuds as per the steps below (make sure your earbuds have enough battery).
Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
When resetting the earbuds, make sure the earbuds are properly connected with charging points in the case, or it may cause resetting failure.
4. Turn on the Bluetooth on your device and search for soundcore Sleep A10 and pair.
If there is a pop-up window to confirm pairing for "soundcore Sleep A10," please select "Pair." If you accidentally select "Cancel", you need to refresh (turn off and turn on) the Bluetooth on your device and pair the earbuds again.
2. Reboot the Bluetooth device you're using (such as a phone or computer). Forget all the pairing records of your earbuds on your device and turn off Bluetooth.
3. Reset the earbuds as per the steps below (make sure your earbuds have enough battery).
Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
When resetting the earbuds, make sure the earbuds are properly connected with charging points in the case, or it may cause resetting failure.
4. Turn on the Bluetooth on your device and search for soundcore Sleep A10 and pair.
If there is a pop-up window to confirm pairing for "soundcore Sleep A10," please select "Pair." If you accidentally select "Cancel", you need to refresh (turn off and turn on) the Bluetooth on your device and pair the earbuds again.
When the earbuds are pairing with my phone, the sound comes through my phone. What should I do?
You can check whether the earbuds are in sleep mode (you may have touched the left earbud by mistake and double-tapped to enter sleep mode). In sleep mode, the earbuds can only play white noise, but cannot play Bluetooth music.
Sound Quality
The sound quality is poor when using them in music mode. What should I do?
You can do the following:
1. Try setting a different EQ via the soundcore app.
2. Reset the earbuds as follows:
Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
3. Try using a different sound source or music app.
1. Try setting a different EQ via the soundcore app.
2. Reset the earbuds as follows:
Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
3. Try using a different sound source or music app.
The sound quality of the white noise is poor. What should I do?
1. Update your software to the latest version via the soundcore app.
2. Try using different white noise in the soundcore app.
2. Try using different white noise in the soundcore app.
The noise cancelling effect of these earbuds is not working well. What should I do?
soundcore Sleep A10 does not support active noise cancelling. If the Smart Volume Control effect isn't up to scratch, try a different size of ear wings and eartips. Also try to make sure you're wearing them correctly.
The notification volume is too loud. What should I do?
You can turn off the notification tone in the soundcore app.
The volume is too low. What should I do?
Volume adjustment is different in the two modes:
1. When using them in sleep mode, the volume of the white noise just can be adjusted via soundcore app.
2. When using them in music mode, you need to turn on volume synchronization via the settings on your mobile phone.
1. When using them in sleep mode, the volume of the white noise just can be adjusted via soundcore app.
2. When using them in music mode, you need to turn on volume synchronization via the settings on your mobile phone.
There is a stethoscope effect when wearing the Sleep A10 earbuds. What should I do?
Please try different sizes of ear wings and eartips and also adjust the wearing angle of the earbuds.
Does soundcore Sleep A10 support calls?
soundcore Sleep A10 has no mic for calling. When wearing these earbuds for calls, you will be able to hear but you will have to use an external mic.
App Function
What should I do if Sleep A10 earbuds can't pair with the soundcore app?
1. Pair the earbuds with your phone. Currently, the soundcore app is not available for computers.
2. Open the soundcore app, choose Add Devices > Headphones, Speakers, and Frames, to find your device.
3. If you cannot find Sleep A10 in the list, please choose Set up Manually > Sleep > Sleep A10.
4. If you cannot find Sleep A10 in the list, please update the app to the latest version (3.0.1 or above). Alternatively, you can uninstall then reinstall the soundcore app.
If the problem still persists, please contact us and let us know which version of the soundcore app and phone model you're using so we can further assist you.
2. Open the soundcore app, choose Add Devices > Headphones, Speakers, and Frames, to find your device.
3. If you cannot find Sleep A10 in the list, please choose Set up Manually > Sleep > Sleep A10.
4. If you cannot find Sleep A10 in the list, please update the app to the latest version (3.0.1 or above). Alternatively, you can uninstall then reinstall the soundcore app.
If the problem still persists, please contact us and let us know which version of the soundcore app and phone model you're using so we can further assist you.
How do you download white noise?
Download white noise in music mode. Please note: You can't download white noise in sleep mode and importing third-party audio sources is not supported.
It's taking a while to download white noise. What should I do?
You can do the following:
1. Don't play music or use your phone while downloading.
2. Make sure your Wi-Fi is working well.
1. Don't play music or use your phone while downloading.
2. Make sure your Wi-Fi is working well.
What should I do when the white noise has an unnatural loop?
We suggest you try some different white noise which you can find in the soundcore app.
Why is the sleep detection data inaccurate?
Your sleep report is given using the data gathered from your earbuds. Sometimes the earbuds can misinterpret certain activities as you being asleep or awake. For example, if you’re wearing them and sit still for a while or you just leave your earbuds out of the case for a prolonged period of time, it may interpret this as sleep. The soundcore app would then use this data in your sleep report, therefore distorting your sleep curve.
Why is there no sleep data?
How sleep detection works:
The earbuds judge whether the user has fallen asleep by their movements. If within half an hour, the user barely moves, the earbuds determine that they have fallen asleep and generates sleep data. If they often move around while sleeping, it may cause the earbuds to misjudge that they are still awake, so no sleep data will be recorded.
1. Open the soundcore app, log in, and connect the earbuds to synchronize data before sleeping (do not put the earbuds back in the case or turn them off after syncing).
2. Make sure you have good signal. Sleep data may take a while to display due to bad signal.
3. Keep the app and firmware up to date.
The earbuds judge whether the user has fallen asleep by their movements. If within half an hour, the user barely moves, the earbuds determine that they have fallen asleep and generates sleep data. If they often move around while sleeping, it may cause the earbuds to misjudge that they are still awake, so no sleep data will be recorded.
1. Open the soundcore app, log in, and connect the earbuds to synchronize data before sleeping (do not put the earbuds back in the case or turn them off after syncing).
2. Make sure you have good signal. Sleep data may take a while to display due to bad signal.
3. Keep the app and firmware up to date.
The sleep reminder doesn't work after I open it. What should I do?
You need to keep the app active in the foreground for a prompt. You will only get a prompt on your phone not on the earbuds.
Sometimes the alarm doesn't go off after I've set one. What should I do?
The alarm only repeats once and the alarm turns off once you put the earbuds back in the case or when you turn it off yourself. You need to set a new alarm each time you want to turn it on.
How do I set an alarm?
1. Connect the headphones to your phone, open the soundcore app, and click on Sleep A10.
2. Click the Settings button in the upper right corner.
3. Click "Add alarm" to set an alarm clock (you can set up to three alarms).
2. Click the Settings button in the upper right corner.
3. Click "Add alarm" to set an alarm clock (you can set up to three alarms).
How do I snooze or turn off the alarm?
1. Firmly double tap the left or right earbud to pause.
2. Pause it via the soundcore app.
3. The alarm will not go off again after it has been paused.
2. Pause it via the soundcore app.
3. The alarm will not go off again after it has been paused.
UI
How do I check how much battery is left?
1. After the earbuds are paired with the soundcore app, you can check it via the app.
2. When the earbuds are in the charging case, the three lights in the charging case blink:
- When three LED lights are white, the case is on more than 70% battery.
- When the left two LED lights are white and the right LED is off, the case is on 30%-70%.
- When the left LED is white and the right two LED's are off, the case is on 5%-30%.
- When the left LED blinks and the right two LED's are off, the case is on less than 5%.
2. When the earbuds are in the charging case, the three lights in the charging case blink:
- When three LED lights are white, the case is on more than 70% battery.
- When the left two LED lights are white and the right LED is off, the case is on 30%-70%.
- When the left LED is white and the right two LED's are off, the case is on 5%-30%.
- When the left LED blinks and the right two LED's are off, the case is on less than 5%.
How do I know if I've paired the earbuds successfully?
After pairing with a phone successfully, the two lights in the charging case flash slowly.
Maintenance
How do I clean the earbuds, ear tips, and ear wings?
You can use a clean cloth and rubbing alcohol to clean them.
What is the waterproof rating for Sleep A10's?
The earbuds are IPX4 water resistant.
The charging case is not waterproof.
The charging case is not waterproof.
Documents & Drivers
