P3 | Noise Cancelling Earbuds with Bass

1. Place the earbuds into the charging case and keep the case open.
2. Press and hold the button on the charging case for 10 seconds until 3 LED indicators on the charging case flash white 3 times and then flash white in sequence continuously. This confirms that the reset is successful.
When resetting the earbuds, make sure the earbuds are well connected with the case, or it may cause resetting failure. The first and third LEDs will flash to indicate that they are properly connected. (When earbuds are placed in the charging case, the first LED flashes twice when the left earbud is in the case, and the third LED flashes twice when the right earbud is in the case)

1. Remove the protective film covering the connectors on the earbuds.
2. Reboot the Bluetooth device, such as a phone or computer. Forget all the pairing records on your device and turn off Bluetooth.
3. Reset the earbuds as per the steps below (make sure your earbuds have enough battery.)
*Place the earbuds into the charging case and keep the case open.
*Press and hold the button on the charging case for 10 seconds until 3 LED indicators on the charging case flash white 3 times and then flash white in sequence continuously. This confirms that the reset is successful.
When resetting the earbuds, make sure the earbuds are well connected with the case, or it may cause resetting failure. The first and third LEDs will flash to indicate that they are properly connected. (The first LED flashes twice when the left earbud is in the case, and the third LED flashes twice when the right earbud is in the case).
4. Turn on the Bluetooth of your device and search for soundcore Life P3 and pair.
If there is a pop-up window to confirm pairing for "soundcore Life P3," please select "pair." If you accidentally select "cancel," you need to refresh (turn off and turn on) the Bluetooth of your device and pair the earbuds again.

Please note that this doesn't necessarily mean there is an issue with the earbuds but may have something to do with the connected device and environment. Bluetooth signals may be influenced by obstructions, such as walls, pillars, home appliances, Wi-Fi, and more. To ensure a stable connection, we recommend avoiding such obstructions.
To fix this issue, please try the following:
1. Fully charge and reset your earbuds as stated below and re-pair them.
*Place the earbuds into the charging case and keep the case open.
*Press and hold the button on the charging case for 10 seconds until 3 LED indicators on the charging case flash white 3 times and then flash white in sequence continuously. This confirms that the reset was successful.
2. Check the earbuds by listening to downloaded music/video.
3. Check the earbuds with another Bluetooth device in a different environment to see if it works well.

1. Fully charge and reset your earbuds as stated below:
*Place the earbuds into the charging case and keep the case open.
*Press and hold the button on the charging case for 10 seconds until 3 LED indicators on the charging case flash white 3 times and then flash white in sequence continuously. This confirms that the reset was successful.
2. Upgrade your computer's Bluetooth driver to the latest version.
3. Re-pair your earbuds to your computer.
4. Test the earbuds on your phone to see if they are working properly.

This feature is currently not supported.
If you want to pair Life P3 with a second device, please use one of the following methods:
- Turn off Bluetooth on your current device so the earbuds enter pairing mode.
Or
1. Place the earbuds back into the charging case and keep the lid open.
2. To enter pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flashes white in sequence continuously.
Please do not remove the earbuds from the case before pairing them with the second device.

1. Pair your earbuds with your phone. Currently, the soundcore App does not support computers.
2. Click on the soundcore App, and choose Headphones> Life >Life P3 to connect the earbuds.
3. If you cannot find Life P3 in the list, please update the app to the latest version (the version should be above 2.7.0.).
4. Uninstall then proceed to reinstall the soundcore App.
If the problem still persists, please let us know the version of your soundcore App and the phone model used so we can assist you better.

1. Make sure your earbuds have enough power before resetting them:
*Place the earbuds into the charging case and keep the case open.
*Press and hold the button on the charging case for 10 seconds until 3 LED indicators on the charging case flash white 3 times and then flash white in sequence continuously. This confirms that the reset was successful.
2. Clear all the pairing records on your phone and re-pair your earbuds. Turn the volume down one notch on your phone. Then turn up the volume of both your phone and earbuds with the music/video to the maximum.
3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.

1. Make sure your earbuds have enough power before resetting them;
*Place the earbuds into the charging case and keep the case open.
*Press and hold the button on the charging case for 10 seconds until 3 LED indicators on the charging case flash white 3 times and then flash white in sequence continuously. This confirms that the reset was successful.
2. Clear all the pairing records on your Mac computer and re-pair your earbuds. Turn the volume down one notch on your Mac computer. Then turn up the volume of both your Mac computer and earbuds with the music/video to the maximum.
3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.

1. Make sure your earbuds have enough power before resetting them:
*Place the earbuds into the charging case and keep the case open.
*Press and hold the button on the charging case for 10 seconds until 3 LED indicators on the charging case flash white 3 times and then flash white in sequence continuously. This confirms that the reset was successful.
2. Clear all the pairing records on your Windows computer and re-pair your earbuds. Make sure you choose the right mode (For audio/video, choose Stereo, and for mic choose Hands-Free)
3. Turn up the volume of your computer, earbuds and music/video to the maximum.
4. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.

1. If you only want to listen to the audio on the computer, select "Life P3 Stereo" for the computer audio. If you need to adjust the volume, adjust both the software and the computer volume.
2. If you need to use a conference app on your computer such as Zoom/Microsoft Teams, please set the input and output of the software as stated below:
- Microphone on the conference software: Life P3 Hands-Free
- Speaker on the conference app: Life P3 Hands-Free
If you need to adjust the volume, please do so on the app. If you cannot adjust the volume on the app, please select the Life P3 Hands-Free as output on your computer and adjust the volume.
3. If you need to use an audio and video app on the computer and you cannot set the input and output on the app, please open the computer audio settings and choose the correct settings:
Input: Life P3 Hands-Free
Output: Life P3 Hands-Free

1. Make sure you have raised both the volume of the earbuds and the connected device to the maximum.
2. Make sure you're wearing the earbuds in the correct position to create a tight seal.
3. Try switching to the phone mic and make a call to see if the problem still persists.

1. If you only use one earbud, make sure the other bud is in the charging case.
2. Try different sizes of ear tips that come with the earbuds and make sure you're wearing them in the correct position to create a tight seal.
2. Please make sure the audio output device chosen is "soundcore Life P3" on the connected device and turn up the volume on your device.
3. If you make a call via an app, please try using your phone to make a call instead to see if the problem still persists.
4. Try testing your earbuds with a different Bluetooth device in a different environment to see if it makes any difference.

1. Try different sizes of the ear tips that come with the earbuds and make sure you're wearing the earbuds in the correct position so that they create a tight seal. This will enhance the sound quality and noise cancellation effect.
2. Try different types of music and make sure the input audio source has no distortion or noise.
3. Try different EQ modes on the soundcore App and customize the EQ to your preference.

1. Try different sizes of the ear tips that come with the earbuds and make sure you're wearing the earbuds in the correct position so that they create a tight seal. This will enhance the noise cancellation effect.
2. The three noise cancelling modes are optimized according to different usage scenarios. They can be selected and switched in the soundcore app, but the difference may not be too obvious in a quiet environment;
Transport mode: Suitable for noisy environments such as airplanes/railroads.
Indoor mode: Suitable for a relatively quiet indoor environment with comfortable noise cancellation.
Outdoor mode: Reduce outdoor environmental noise considerably. Listening to music with headphones and perceiving the external environment changes at the same time.

1. Pair your earbuds with your phone.
2. Turn down the volume when making a call.
3. Restart Siri, and the volume should be lower.

SBC and AAC.

Normal mode is recommended during exercise.

Hold either side of the earbuds for 2 seconds to hang up the call while a single/double click on either one of the buds receives the call.

1. When the earbuds are placed in the charging case with the lid closed.
2. 30 minutes later when there are no devices connected to the earbuds.

The earbuds will automatically power on when the charging case is opened. We regret to inform you that you cannot power on the earbuds without the charging case.
1. Remove the protective film covering the connectors on the earbuds.
2. Make sure the charging case has enough power.
3. Place the earbuds in the charging case, then reopen the charging case.

Here's what you can do to enhance the sound quality and noise cancellation:
1. Try other eartips sizes to ensure the one you're using fits well and creates a tight seal.
2. Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Tip Fit Test on the soundcore app and watch this video for more information.
3. Try different noise cancellation modes to find one that's most suited to your environment. You can also customize the EQ to tailor the sound to your ears.
Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.

Power on:
1. The earbuds will turn on automatically when you open the lid of the charging case.
Power off:
2. Put the earbuds back into the charging case and close the lid to turn off the earbuds.
3. The earbuds will also turn off automatically when placed outside the case and have been disconnected from your device for 30 minutes.

1. Use the earbuds regularly to avoid over-discharge which can harm the lifespan of the earbuds' battery. We recommend using Life P3 at least once a month.
2. Charge the earbuds after you use them. In order to improve the battery’s lifespan, do not always wait until there's 20% power remaining or less to charge them.
3. If you intend to store the charging case, make sure there are at least 2 indicators that light up on the case to ensure there is enough power.
4. Open the lid of the charging case at least once a month to ensure the earbuds are still working.
5. Regularly clean the charging pins on the earbuds and charging case.
6. Keep the eartips clean.
7. If Life P3 comes into contact with liquid, use a hairdryer on the 'cool' setting to dry the case.

Use the stems of the earbuds to adjust Life P3's position in your ears and avoid touching the touchpad.

Please make sure you are tapping the right spot on Life P3 (where the logo is printed).

1. It enhances the gaming sound, such as footsteps and voices.
2. It can reduce the earbuds' latency during games. Please note that different networks and phones can cause latency to occur.

1. This feature can only be used when the earbud(s) is connected to the phone.
2. Connect the earbud(s) to the soundcore App. Click on the settings logo in the top right and select "Find Device". Note: Do not use earbuds while using this feature to protect your hearing.

1. Keep the earbuds in the charging case and keep the lid open.
2. Make sure the earbuds have enough power (over 20%).
3. Do not use the earbuds during the process.
4. Try again if it fails.

Yes, just take one earbud out from the charging case to use. If you are using two earbuds, you can put either one of the earbuds back into the charging case and continue using the other one on its own.

About 2 hours.

About 3 hours.

Yes, place the case on a wireless charging pad and make sure it's closed and centrally aligned. If it starts charging you will see the LEDs blinking.

1. Confirm that the charging case has power left (open the lid of the charging case to check if there is any indication on the LED).
2. Close the lid after placing the earbuds in the charging case and start charging.

1. Confirm the charging case has power left (open the charging case lid to check if there is any indication on the LED).
2. Clean the charging pins with a dry cloth and an alcohol-based disinfectant. This is to ensure all charging contact pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds correctly into the case. When you put the earbuds back into the charging case, the first and third lights on the case will flash twice to indicate both earbuds are charging normally.
3. If they still do not turn on, put the earbuds back into the charging case and close the lid for 6 seconds, and try opening the lid again.