Sport X10 (Refurbished)
All-New soundcore Sport X10 Workout Earbuds
product
- Incredible Sound Loved by 20 Million+ People
- Rotate, Set, Go: Twist the 210° rotatable ear hooks until you find the perfect spot for you. The unique design keeps Sport X10 workout earbuds comfortably and securely in place throughout your workout.
- Exercise-Proof Buds: Sport X10 workout earbuds have a fully-waterproof, IPX7-rated build that stops liquids in their tracks. For further protection, our exclusive SweatGuard technology defends against the corrosive properties of sweat.
- Hardcore Beats for Maximum Motivation: The dynamic acoustic system delivers 2× more bass while preserving the clarity of mids and treble. BassUp technology analyzes and enhances your music's bass in real-time for an extra boost.
- Up to 32 Hours Playtime: Get 8 hours of music from a single charge of the workout earbuds and add an extra 3 full recharges via the charging case.
Services and benefits
Want More Perks?
1. Priority Shipping2. Member Pricing on Selected Products 3. Birthday Gift4. Unlock Benefits with soundcoreCredits Learn More
Payment Method
Sport X10 (Refurbished)
Sold Out
FAQ
How-To Videos
Wearing
We suggest trying the following:
- Choose the ear tips that fit your ears the best.
- Rotate the ear hook to open.
- Insert the earbud into your ear.
- Hook the ear hook over your ear and find a suitable position for the best fit.
- Choose the ear tips that fit your ears the best.
- Rotate the ear hook to open.
- Insert the earbud into your ear.
- Hook the ear hook over your ear and find a suitable position for the best fit.
The ear hooks cannot be detached and can rotate up to 210 degrees.
Operation
1. Open the lid for the earbuds to turn on automatically.
2. Alternatively, press the button for 3 seconds to turn them on. Or put the earbuds back in the case, close the lid, and then open again.
2. Alternatively, press the button for 3 seconds to turn them on. Or put the earbuds back in the case, close the lid, and then open again.
1. The earbuds automatically enter charging mode when the case is shut, and the earbuds turn off when fully charged.
2. Alternatively method: Press the button on the earbud for 8 seconds to turn off manually.
2. Alternatively method: Press the button on the earbud for 8 seconds to turn off manually.
soundcore Sport X10 earbuds have physical buttons on the side:
Play / Pause: Press the right earbud twice (Default)
Next: Press the left earbud twice (Default)
Volume Up: Press the right earbud once (The volume cannot be adjusted when using a single earbud)
Volume Down: Press the left earbud once
Voice Assistant: Press the left or right earbud for 2 seconds (Only works when using a single earbud)
You can also customize the controls via the soundcore app to suit your needs.
Play / Pause: Press the right earbud twice (Default)
Next: Press the left earbud twice (Default)
Volume Up: Press the right earbud once (The volume cannot be adjusted when using a single earbud)
Volume Down: Press the left earbud once
Voice Assistant: Press the left or right earbud for 2 seconds (Only works when using a single earbud)
You can also customize the controls via the soundcore app to suit your needs.
Bluetooth
1. Place the earbuds in the charging case and leave the case open.
2. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
1. Remove the protective film covering the connectors on the earbuds.
2. Reboot the Bluetooth device you're using (such as a phone or computer). Forget all the pairing records of your earbuds on your device and turn off Bluetooth.
3. Reset the earbuds as per the steps below (make sure your earbuds have enough battery).
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
When resetting the earbuds, make sure the earbuds are properly connected with charging points in the case, or it may cause resetting failure.
4. Turn on the Bluetooth of your device and search for soundcore Sport X10 and pair.
If there is a pop-up window to confirm pairing for "soundcore Sport X10," please select "Pair." If you accidentally select "Cancel", you need to refresh (turn off and turn on) the Bluetooth of your device and pair the earbuds again.
2. Reboot the Bluetooth device you're using (such as a phone or computer). Forget all the pairing records of your earbuds on your device and turn off Bluetooth.
3. Reset the earbuds as per the steps below (make sure your earbuds have enough battery).
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
When resetting the earbuds, make sure the earbuds are properly connected with charging points in the case, or it may cause resetting failure.
4. Turn on the Bluetooth of your device and search for soundcore Sport X10 and pair.
If there is a pop-up window to confirm pairing for "soundcore Sport X10," please select "Pair." If you accidentally select "Cancel", you need to refresh (turn off and turn on) the Bluetooth of your device and pair the earbuds again.
Please note that this doesn't necessarily mean there is an issue with the earbuds, but may have something to do with the connected device and environment. Bluetooth signals may be influenced by obstructions, such as walls, pillars, home appliances, Wi-Fi, and more. To ensure a stable connection, we recommend avoiding such obstructions.
To fix this issue, please try the following:
1. Fully charge and reset your earbuds as stated below and re-pair them.
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Check the earbuds by listening to a downloaded song/video.
3. Check the earbuds with another Bluetooth device in a different environment to see if it works well.
To fix this issue, please try the following:
1. Fully charge and reset your earbuds as stated below and re-pair them.
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Check the earbuds by listening to a downloaded song/video.
3. Check the earbuds with another Bluetooth device in a different environment to see if it works well.
1. Rotate the ear hook to "closed" position.
2. Clean the earbuds and make sure they are dry.
3. Put your earbuds into the charging case and close the lid.
4. Wait for 6 seconds and open the lid.
5. If it fails, try again.
2. Clean the earbuds and make sure they are dry.
3. Put your earbuds into the charging case and close the lid.
4. Wait for 6 seconds and open the lid.
5. If it fails, try again.
When this happens, your earbuds are both in Mono mode. To return to Stereo mode:
1. Put both earbuds back into the charging case and close it.
2. Turn off the Bluetooth on one of your two devices.
3. Make sure there is only one discoverable Bluetooth device in range.
4. Open your case and remove both earbuds. They will reconnect with the Bluetooth device in Stereo mode.
1. Put both earbuds back into the charging case and close it.
2. Turn off the Bluetooth on one of your two devices.
3. Make sure there is only one discoverable Bluetooth device in range.
4. Open your case and remove both earbuds. They will reconnect with the Bluetooth device in Stereo mode.
1. Make sure the earbuds are fully charged and turned on.
2. Open the charging case and ensure the earbuds are in it. The earbuds will enter pairing mode.
3. Open the Bluetooth list on your device and select "Sport X10".
4. When successfully connected, the 3 LED indicators will turn steady white for 3 seconds and then turn off.
2. Open the charging case and ensure the earbuds are in it. The earbuds will enter pairing mode.
3. Open the Bluetooth list on your device and select "Sport X10".
4. When successfully connected, the 3 LED indicators will turn steady white for 3 seconds and then turn off.
The Bluetooth range is 10m/33ft.
Sport X10 supports SBC and AAC.
Bluetooth 5.2
App
1. Pair the earbuds with your phone. Currently, the soundcore app is not available for computers.
2. Open the soundcore app, choose Add Devices > Headphones, Speakers, and Frames to find your device.
3. If you cannot find Sport X10 in the list, please choose Set up Manually > Sport > Sport X10.
4. If you cannot find Sport X10 in the list, please update the app to the latest version (3.0.1 or above). Alternatively, you can uninstall then reinstall the soundcore app.
If the problem still persists, contact us and let us know the version of the soundcore app and the phone model you're using so we can assist you better.
2. Open the soundcore app, choose Add Devices > Headphones, Speakers, and Frames to find your device.
3. If you cannot find Sport X10 in the list, please choose Set up Manually > Sport > Sport X10.
4. If you cannot find Sport X10 in the list, please update the app to the latest version (3.0.1 or above). Alternatively, you can uninstall then reinstall the soundcore app.
If the problem still persists, contact us and let us know the version of the soundcore app and the phone model you're using so we can assist you better.
1. This feature can only be used when Sport X10 is connected to your phone.
2. Connect Sport X10 to the soundcore app. Select "Breathe", then choose the mode you want to use and "Press to Start".
3. If you want to end the training, press the center of the breath circle.
4. If you want to set a timer and choose background music, go to "Settings" in the upper right corner to create a new custom mode. You can customize the inhale and exhale duration and choose background music.
Please watch this video for more information.
2. Connect Sport X10 to the soundcore app. Select "Breathe", then choose the mode you want to use and "Press to Start".
3. If you want to end the training, press the center of the breath circle.
4. If you want to set a timer and choose background music, go to "Settings" in the upper right corner to create a new custom mode. You can customize the inhale and exhale duration and choose background music.
Please watch this video for more information.
Sound
You can try the following:
1. Reset the earbuds. Make sure your earbuds have enough power, then:
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Clear all the pairing records on your phone and re-pair your earbuds. Turn the volume down one notch on your phone. Then turn up the volume of both your phone and earbuds with the song/video to the maximum.
3. Use a cotton swab with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.
1. Reset the earbuds. Make sure your earbuds have enough power, then:
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Clear all the pairing records on your phone and re-pair your earbuds. Turn the volume down one notch on your phone. Then turn up the volume of both your phone and earbuds with the song/video to the maximum.
3. Use a cotton swab with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.
You can try the following:
1. Reset the earbuds. Make sure your earbuds have enough power, then:
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Clear all pairing records on your Mac computer and re-pair your earbuds. Turn the volume down one notch on your Mac computer. Then turn up the volume of your computer, earbuds and music/video to the maximum.
3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.
1. Reset the earbuds. Make sure your earbuds have enough power, then:
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Clear all pairing records on your Mac computer and re-pair your earbuds. Turn the volume down one notch on your Mac computer. Then turn up the volume of your computer, earbuds and music/video to the maximum.
3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.
You can try the following:
1. Reset the earbuds. Make sure your earbuds have enough power, then:
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Clear all the pairing records on your Windows computer and re-pair your earbuds. Make sure you choose the right mode (For audio/video, choose Stereo, and for the mic, choose Hands-Free). Turn up the volume of your computer, earbuds, and song/video to the maximum.
3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.
1. Reset the earbuds. Make sure your earbuds have enough power, then:
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
2. Clear all the pairing records on your Windows computer and re-pair your earbuds. Make sure you choose the right mode (For audio/video, choose Stereo, and for the mic, choose Hands-Free). Turn up the volume of your computer, earbuds, and song/video to the maximum.
3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips.
1. If you only want to listen to audio on the computer, select "Sport X10" for the computer audio. If you need to adjust the volume, adjust both the software and the computer volume.
2. If you need to use a conference app on your computer such as Zoom/Microsoft Teams, please set the input and output of the software as stated below:
- Microphone for software: Sport X10 Hands-Free
- Speaker for app: Sport X10 Hands-Free
If you need to adjust the volume, use the app. If you cannot adjust the volume on the app, please select "Sport X10 Hands-Free" as the output on your computer and adjust the volume.
3. If you need to use an audio and video app on your computer and you cannot set the input and output on the app, open the computer audio settings and choose the following settings:
Input: Sport X10 Hands-Free
Output: Sport X10 Hands-Free
2. If you need to use a conference app on your computer such as Zoom/Microsoft Teams, please set the input and output of the software as stated below:
- Microphone for software: Sport X10 Hands-Free
- Speaker for app: Sport X10 Hands-Free
If you need to adjust the volume, use the app. If you cannot adjust the volume on the app, please select "Sport X10 Hands-Free" as the output on your computer and adjust the volume.
3. If you need to use an audio and video app on your computer and you cannot set the input and output on the app, open the computer audio settings and choose the following settings:
Input: Sport X10 Hands-Free
Output: Sport X10 Hands-Free
1. Make sure you have raised both the volume of the earbuds and the connected device to the maximum.
2. Make sure you're wearing the earbuds in the correct position to create a tight seal.
3. Try switching to the phone mic and make a call to see if the problem still persists.
2. Make sure you're wearing the earbuds in the correct position to create a tight seal.
3. Try switching to the phone mic and make a call to see if the problem still persists.
During calls, Sport X10 will automatically switch to Normal mode, so that you can receive your own voice feedback in real time.
You can try the following:
- If you only use one earbud, make sure the other earbud is in the charging case.
- Try different sizes of ear tips that come with the earbuds and make sure you're wearing them in the correct position to create a tight seal.
- Please make sure the audio output device chosen is "soundcore Sport X10" on the connected device.
- If you make a call via an app, please try using your phone to make a call and see if the problem still persists.
- Try testing your earbuds with a different Bluetooth device in a different environment to see if it makes any difference.
- If you only use one earbud, make sure the other earbud is in the charging case.
- Try different sizes of ear tips that come with the earbuds and make sure you're wearing them in the correct position to create a tight seal.
- Please make sure the audio output device chosen is "soundcore Sport X10" on the connected device.
- If you make a call via an app, please try using your phone to make a call and see if the problem still persists.
- Try testing your earbuds with a different Bluetooth device in a different environment to see if it makes any difference.
You can try the following:
- Try different sizes of the included ear tips and make sure you're wearing the earbuds in the correct position so they create a tight seal. This will enhance the sound quality and noise cancellation effect.
- Try different types of music and make sure the input audio source has no distortion or other noises.
- Try different EQ modes on the soundcore app and customize the EQ to your preference.
- Try different sizes of the included ear tips and make sure you're wearing the earbuds in the correct position so they create a tight seal. This will enhance the sound quality and noise cancellation effect.
- Try different types of music and make sure the input audio source has no distortion or other noises.
- Try different EQ modes on the soundcore app and customize the EQ to your preference.
- Try different sizes of the included ear tips and make sure you're wearing the earbuds in the correct position so they create a tight seal. This will enhance the sound quality and noise cancellation effect.
- Turn on "BassUp" in the soundcore app.
- Turn on "BassUp" in the soundcore app.
Normal mode is recommended during exercise.
We recommend turning off noise cancelling mode. Try using normal mode to see if it reduces the effect.
Open the soundcore app and press “Settings” in the top right corner to open “Wind Noise Cancellation". The earbuds will automatically reduce the FF MIC gain when wind noise is detected to reduce its effect when listening to music or making calls.
Charging
It takes about 1 hour to fully charge the earbuds.
It takes about 2 hours to fully charge the charging case.
No, it doesn't.
1. Confirm the charging case has power left (open the charging case to check if there is white light flashing).
2. Clean the charging pins with a dry cloth and an alcohol-based disinfectant. This is to ensure all charging contact pins on the earbuds and charging case are completely clean and dry from sweat and water. Then put the earbuds correctly into the case. The first light flashes twice when the left earbud is placed in the case. The third light flashes twice when the right earbud is placed in the case.
3. Please use the certified charging cable and wall charger.
4. Please check whether the ear tips are installed properly.
2. Clean the charging pins with a dry cloth and an alcohol-based disinfectant. This is to ensure all charging contact pins on the earbuds and charging case are completely clean and dry from sweat and water. Then put the earbuds correctly into the case. The first light flashes twice when the left earbud is placed in the case. The third light flashes twice when the right earbud is placed in the case.
3. Please use the certified charging cable and wall charger.
4. Please check whether the ear tips are installed properly.
When the charging case is fully charged, it can fully charge the earbuds 3 times. On the 4th time it will partially charge the earbuds to approximately 60%.
Normal: 8H (single charge) / 32H (with charging case)
ANC: 6H (single charge) / 24H (with charging case)
Transparency: 7H (single charge) / 28H (with charging case)
Call: 5H (single charge) / 20H (with charging case)
ANC: 6H (single charge) / 24H (with charging case)
Transparency: 7H (single charge) / 28H (with charging case)
Call: 5H (single charge) / 20H (with charging case)
Sport X10 earbuds have an IPX7 waterproof rating. The charging case does not have a waterproof rating. Note:
- Do not place earbuds and the charging case into a washing machine.
- Make sure that the earbuds and the charging case are dry before charging.
- Do not place earbuds and the charging case into a washing machine.
- Make sure that the earbuds and the charging case are dry before charging.
UI
- Left LED flashes white for 3 seconds: Only 0-5% battery remaining.
- Left LED is steady white for 3 seconds: 6-30% battery remaining.
- 2 LEDs on left side are steady white for 3 seconds: 31-70% battery remaining.
- All LEDs are steady white for 3 seconds: 71-100% battery remaining.
- The left LED flashes twice when the left earbud is placed in the case.
- The right LED flashes twice when the right earbud is placed in the case.
- Left LED is steady white for 3 seconds: 6-30% battery remaining.
- 2 LEDs on left side are steady white for 3 seconds: 31-70% battery remaining.
- All LEDs are steady white for 3 seconds: 71-100% battery remaining.
- The left LED flashes twice when the left earbud is placed in the case.
- The right LED flashes twice when the right earbud is placed in the case.
- No power source connected to the charging case: 3 LEDs are turned off.
- Charge to 0-30%: The left LED flashes white continuously, and the other two LEDs are off.
- Charge to 31-70%: The LED on the left is steady white, the middle LED flashes white continuously, and the right LED is off.
- Charge to 71-99%: The left two LEDs are steady white, and the right LED flashes white continuously.
- When fully charged, all LED indicators are steady white for 1 minute.
- Unplug after fully charged: All LEDs are turned off.
- Charge to 0-30%: The left LED flashes white continuously, and the other two LEDs are off.
- Charge to 31-70%: The LED on the left is steady white, the middle LED flashes white continuously, and the right LED is off.
- Charge to 71-99%: The left two LEDs are steady white, and the right LED flashes white continuously.
- When fully charged, all LED indicators are steady white for 1 minute.
- Unplug after fully charged: All LEDs are turned off.
The 3 LEDs on the charging box flash white continuously. If the earbuds are not successfully connected after 10 minutes they will turn off.
The 3 LEDs are steady white for 3 seconds then turns off.
Place the earbuds in the charging case and leave it open. Press and hold the button on the case for 10 seconds until the 3 LEDs flash white 3 times at the same time.
Documents & Drivers
