soundcore Mini 3 | Mini enceinte Bluetooth pour fêtes

Partycast - As Master Speaker
1.Turn on Mini 3 - Connect to Phone via Bluetooth.
2.Once connected, press the Bluetooth button for at least 3-5 seconds until it begins flashing white
3. Connect additional SoundCore speakers using the instructions found with the other speakers. The light will remain flashing white at all times.
Partycast - As Secondary Speaker
1. Turn on Mini 3.
2. Press Bluetooth button for at least 3-5 seconds until it begins Flashing White.
3. Double Press Bluetooth Button to begin pairing to the master speaker. Allow the speaker to connect, it can take 2-5 seconds.
4. Once bluetooth light is solid white, speaker is successfully connected.

Turn on the speaker, then hold Bluetooth and Vol+ for around 5-10seconds.

It is 5V/1A.

Yes,
It will Auto-turn off after 10 minutes when it is disconnected from the host devices and after 30 minutes when it is no audio signal input.

Try using a different cable and wall charger to full charge the speaker. If possible, then press the power button for 10 seconds, then press it several times to see if that helps. Ideally, the charger should be 5V/1A.

1.Fully charge the speaker
2.Turn on and reset the speaker by holding Bluetooth and Vol+ for around 5-10seconds
3.Try the speaker with another device if possible;try another app or audio source
4.Ensure there are no physical objects hindering the Bluetooth connection from the speaker to the device they're connected to (such as a doorway or wall)

Normally the charging time for this SoundCore mini 3 speaker should be around 3-4 hours with a 5V/1A wall charger. Below are the correct charging indicators:
Power on: Light up white
Low Power: Red flash
Charging: Red
Fully charged: White

Yes.

The SoundCore mini 3 speaker will come with a 60cm USB-C charging cable.